Moldon Polyurethane (Cast Iron Core)
This is a strong, ultra-durable wheel. It has a very high strength-to weight ratio and is capable of long service under heavy loads. Maroon color polyurethane is bonded to the cast iron core.
Phenolic
Phenolic resin wheels are filled with macerated fabric. This wheel provides quieter operation than steel or aluminum, provides superior floor protection, and resists hard impacts, most chemicals and steam.
Moldon Polyurethane (Aluminum Core)
Light-weight and ultra-durable, this wheel has a very high strength-to weight ratio and is capable of long service under heavy loads. Maroon color polyurethane is permanently bonded to the aluminum core.
Moldon Nylon
Brown nylon tread is molded in, around and through slots in an aluminum wheel core. This mechanical tread locking system helps prevent tread bond failures under harsh operating conditions found in meat packing and food processing industries. A nylon wheel is recommended for applications requiring a high resistance to water, oils, gasoline, grease and certain salt solutions. Nylon is also resistant to paints and lacquers, cosmetic preparations, detergents, aerosol preparations, and animal and vegetable fats.
Forged Steel
This wheel should be specified when excessive load weights are involved and floor protection is not a factor. Its high strength withstands sharp impacts. They should not be used if noise is of major concern or if loads are fragile.
Maxim
Colson Maxim Wheels feature an exclusive, ultra-tough thermoplastic compound that resists hard impacts and drop-shocks. The wheel is impervious to most chemicals, solvents, salts, gases, alkalines and steam cleaning and does not absorb water. When compared to other hard tread wheels, Maxim wheels require less force to roll and swivel. It is ideal for many industrial and institutional applications and is NSF listed for the food service industry.
Cushion & Hard Rubber
Cushion and Hard rubber wheels are conventional-style rubber wheels, which provide good floor protection and quiet operation.
Performa Conductive
Many computer manufacturers and electronics companies require conductive wheels on assembly carts to eliminate static build-up and discharge. Although conductive caster wheels have existed for years, almost all of them mark floors. Colson has solved this problem with our selection of Performa Conductive Wheels. These models combine a soft cushion ride with a nonmarking tread design. All wheels feature a cushion grey Performa tread bonded to a black Polyolefin wheel core.
XV Polyurethane V-Groove
Albion XV wheels are polyurethane wheels with v-grooves for use with floor tracking systems. The wheels have a relief groove at the base of the V, which helps equalize the load to each face of angled track when in operation. Wheel face and bore are machined for concentricity to proper tracking. These wheels can be used not only on a track, but any flat surfaces. When using a track, please be aware that track alignment is critical for proper operation.
